Wood Slat Room Dividers — SKANDINAVIA
by Primo Panels

Floor-to-ceiling wood slat room dividers, made to order and shipped across the USA and Canada. Choose rotating (ROTERA) or fixed (FIXERA) slats in five finishes, in lengths from 8ft to 12ft. No sales tax on US orders and we pay all customs and clearance fees.

SKANDINAVIA
WALNUT

Real walnut veneer on a plywood core. Warm amber tones for Scandinavian and mid-century interiors.

EXPLORE WALNUT

SKANDINAVIA
DARK WALNUT

Deep espresso-toned walnut veneer. High contrast for contemporary interiors.

EXPLORE DARK WALNUT

SKANDINAVIA
WHITE OAK

Natural white oak grain. Light and airy, suited to Japandi and minimalist spaces.

EXPLORE WHITE OAK

SKANDINAVIA
PAINTABLE

Primed high-density MDF. Paint to match your trim, walls or a custom accent shade.

EXPLORE PAINTABLE

PRIMO PANELS SKANDINAVIA Wood Slat Room Dividers are manufactured to order. Pre-finished slats are built from a plywood core with a genuine wood veneer in Walnut, Dark Walnut or White Oak. If you want to match an existing finish, choose Unfinished / Stainable or the ready to be primed high-density MDF Paintable slat.

Every divider is a permanent floor-to-ceiling installation. Our self-aligning bracket system means a typical divider goes up in a few hours, DIY or with a contractor. FIXERA can also be installed on vaulted and sloped ceilings using brackets we fabricate to your exact ceiling pitch.

ROTERA or FIXERA — which do you need?

ROTERA — rotating slats. Each slat pivots, so you can open the divider for light and sightlines or close it for privacy. Choose an overlapping pattern for full privacy when closed, or a flat-closed pattern that leaves a ½" gap. Available in 8ft and 9ft lengths.

FIXERA — fixed slats. Slats are set at a fixed spacing you choose, giving a clean, solid, architectural look. Available in 8ft, 9ft, 10ft, 11ft and 12ft lengths, and the only option for vaulted or sloped ceilings.

Both systems use the same self-aligning installation hardware. See ROTERA installation and FIXERA installation for step-by-step videos. You select the system when adding slats to your cart.

Sizes, ordering and lead time

Slat profiles. Standard cross-sections are 2"×4", 2"×5" and 2"×6". Custom cross-sections, including thicker slats, are available — contact us with your project dimensions.

Lengths. ROTERA: 8ft and 9ft. FIXERA: 8ft, 9ft, 10ft, 11ft and 12ft. Slats can be cut to your exact ceiling height on site. For heights above 9ft in a veneered finish, or above 10ft in Paintable or Stainable, dividers are built using extensions.

How pricing works. Dividers are sold by the individual slat, with a minimum order of 12 slats. To work out how many you need and what it will cost, use Build and Price Your Divider — it calculates the slat count from your wall width and ceiling height and adds the exact quantity to your cart. If you would rather do the maths yourself, see How Many Slats Do I Need?

Samples. 8" sample pieces of every finish are $30 and ship free, and the cost is refunded against your divider order. Order samples.

Shipping and lead time. Flat-rate shipping to the USA and Canada. No sales tax on US orders, and we pay all customs and clearance fees. Current production lead time is 2–4 weeks. See Shipping for details.